View UPA2702TP_439881.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
MOS FIELD EFFECT TRANSISTOR
PA2702TP
SWITCHING N-CHANNEL POWER MOS FET
DESCRIPTION
The PA2702TP, which has a heat spreader, is N-Channel MOS Field Effect Transistor designed for DC/DC converter and power management applications of notebook computers.
1.49 0.21 1.44 TYP.
PACKAGE DRAWING (Unit: mm)
8 5 1, 2, 3 ; Source 4 ; Gate 5, 6, 7, 8, 9 ; Drain
FEATURES
* Low on-state resistance RDS(on)1 = 9.5 m MAX. (VGS = 10 V, ID = 7.0 A) RDS(on)2 = 15.1 m MAX. (VGS = 4.5 V, ID = 7.0 A) * Low Ciss: Ciss = 900 pF TYP. (VDS = 10 V, VGS = 0 V) * Small and surface mount package (Power HSOP8)
1 5.2 +0.17 -0.2
4
6.0 0.3 0.8 0.2
+0.10 -0.05
4.4 0.15
S
0.05 0.05
0.15
1.27 TYP. 0.40 1
+0.10 -0.05
0.10 S 0.12 M
1.1 0.2
4 2.0 0.2
2.9 MAX.
ORDERING INFORMATION
PART NUMBER PACKAGE Power HSOP8
8
9 4.1 MAX.
PA2702TP
5
ABSOLUTE MAXIMUM RATINGS (TA = 25C, Unless otherwise noted, All terminals are connected.)
Drain to Source Voltage (VGS = 0 V) Gate to Source Voltage (VDS = 0 V) Drain Current (DC) (TC = 25C) Drain Current (DC) (TA = 25C) Drain Current (pulse)
Note2 Note1
VDSS VGSS ID(DC)1 ID(DC)2 ID(pulse) PT1
Note1
30 20 35 14 65 22 3 150 -55 to +150 16 25.6
V V A A A W W C C A mJ
Gate Protection Diode Source Gate Drain
EQUIVALENT CIRCUIT
Total Power Dissipation (TC = 25C) Total Power Dissipation (TA = 25C) Channel Temperature Storage Temperature Single Avalanche Current Single Avalanche Energy
Note3 Note3
Body Diode
PT2 Tch Tstg IAS EAS
5
Notes 1. Mounted on a glass epoxy board (1 inch x 1 inch x 0.8 mm), PW = 10 sec 2. PW 10 s, Duty Cycle 1% 3. Starting Tch = 25C, VDD = 15 V, RG = 25 , L = 100 H, VGS = 20 0 V Remark The diode connected between the gate and source of the transistor serves as a protector against ESD. When this device actually used, an additional protection circuit is extemally required if a voltage exceeding the rated voltage may be applied to this device.
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. G15845EJ2V0DS00 (2nd edition) Date Published May 2002 NS CP(K) Printed in Japan
The mark 5 shows major revised points.
(c)
2002
PA2702TP
ELECTRICAL CHARACTERISTICS (TA = 25C, Unless otherwise noted, All terminals are connected.)
CHARACTERISTICS Zero Gate Voltage Drain Current SYMBOL IDSS IGSS VGS(off) | yfs | RDS(on)1 RDS(on)2 RDS(on)3 Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Total Gate Charge Gate to Source Charge Gate to Drain Charge Body Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Ciss Coss Crss td(on) tr td(off) tf QG QGS QGD VF(S-D) trr Qrr VDD = 15 V VGS = 5 V ID = 13 A IF = 13 A, VGS = 0 V IF = 13 A, VGS = 0 V di/dt = 100 A/ s TEST CONDITIONS VDS = 30 V, VGS = 0 V VGS = 20 V, VDS = 0 V VDS = 10 V, ID = 1 mA VDS = 10 V, ID = 7.0 A VGS = 10 V, ID = 7.0 A VGS = 4.5 V, ID = 7.0 A VGS = 4.0 V, ID = 7.0 A VDS = 10 V VGS = 0 V f = 1 MHz VDD = 15 V, ID = 7.0 A VGS = 10 V RG = 10 1.5 7 2.0 13 7.6 11.3 12.9 900 380 120 9 5 35 8 9 3 4 0.82 28 22 1.2 9.5 15.1 17.2 MIN. TYP. MAX. 10 10 2.5 UNIT
A A
V S m m m pF pF pF ns ns ns ns nC nC nC V ns nC
5
Gate Leakage Current Gate Cut-off Voltage Forward Transfer Admittance Drain to Source On-state Resistance
TEST CIRCUIT 1 AVALANCHE CAPABILITY
D.U.T. RG = 25 PG. VGS = -20 0 V 50
TEST CIRCUIT 2 SWITCHING TIME
D.U.T.
L VDD PG. RG
VGS RL VDD VDS
90% 90% 10% 10%
VGS
Wave Form
0
10%
VGS
90%
BVDSS IAS ID VDD VDS
VGS 0
VDS
VDS
Wave Form
0 td(on) ton
= 1 s Duty Cycle 1%
tr
td(off) toff
tf
Starting Tch
TEST CIRCUIT 3 GATE CHARGE
D.U.T. IG = 2 mA PG. 50
RL VDD
2
Data Sheet G15845EJ2V0DS
PA2702TP
TYPICAL CHARACTERISTICS (TA = 25C)
DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREA 25 TOTAL POWER DISSIPATION vs. CASE TEMPERATURE
dT - Percentage of Rated Power - %
100 80 60 40 20
PT - Total Power Dissipation - W
20 40 60 80 100 120 140 160
20
15
10
5
0
0 0 20 40 60 80 100 120 140 160 TC - Case Temperature - C
TC - Case Temperature - C
FORWARD BIAS SAFE OPERATING AREA 1000
100
ID(pulse) = 65 A
ID - Drain Current - A
PW
10
d ite ) im 0 V )L =1 on S( GS RD t V (a
=
ID(DC) = 35 A
Power Dissipation Limited
10
1m
s
m
s
1
100 ms
0.1
TC = 25C Single Pulse
0.01 0.01
0.1
1
10
100
VDS - Drain to Source Voltage - V
TRANSIENT THERMAL RESISTANCE vs. PULSE WIDTH
rth(t) - Transient Thermal Resistance - C/W
1000 Remark Rth(ch-A): Mounted on a glass epoxy board
(1 inch x 1 inch x 0.8 mm), TA = 25C Rth(ch-C): TC = 25C
Rth(ch-A) = 89.3C/W
100
10
Rth(ch-C) = 5.68C/W
1
0.1 0.0001
Single Pulse
0.001
0.01
0.1
1
10
100
1000
PW - Pulse Width - s
Data Sheet G15845EJ2V0DS
3
PA2702TP
FORWARD TRANSFER CHARACTERISTICS 100 Pulsed 80 70 DRAIN CURRENT vs. DRAIN TO SOURCE VOLTAGE
ID - Drain Current - A
ID - Drain Current - A
10
60 50 40 30 20 10 VGS = 10 V 4.5 V 4.0 V
1
TA = -25C 25C 75C 150C
0.1
0.01
1
2
3
VDS = 10 V 4 5
0 0
Pulsed 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 VDS - Drain to Source Voltage - V
VGS - Gate to Source Voltage - V
| yfs | - Forward Transfer Admittance - S
100
VDS = 10 V Pulsed
RDS(on) - Drain to Source On-state Resistance - m
FORWARD TRANSFER ADMITTANCE vs. DRAIN CURRENT
DRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE 40 Pulsed 30
10
1
TA = 150C 75C 25C -25C
20
10
ID = 7.0 A
0.1 0.01
0.1
1
10
100
0
0
2
4
6
8
10
12
14
16
18
20
ID - Drain Current - A
VGS - Gate to Source Voltage - V
RDS(on) - Drain to Source On-state Resistance - m
DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT 30 Pulsed 3
GATE CUT-OFF VOLTAGE vs. CHANNEL TEMPERATURE
VDS = 10 V ID = 1 mA
20
VGS(off) - Gate Cut-off Voltage - V
10 100
2
VGS = 4.0 V 10 4.5 V 10 V
1
0 0.01
0.1
1 ID - Drain Current - A
0 -50 -25
0
25
50
75
100 125 150
Tch - Channel Temperature - C
4
Data Sheet G15845EJ2V0DS
PA2702TP
RDS(on) - Drain to Source On-state Resistance - m
DRAIN TO SOURCE ON-STATE RESISTANCE vs. CHANNEL TEMPERATURE 25 Pulsed 100
SOURCE TO DRAIN DIODE FORWARD VOLTAGE Pulsed VGS = 0 V
20 VGS = 4 V 15 4.5 V 10 V
ISD - Diode Forward Current - A
10
1
10
5
0.1
0 -50 -25
0.01 0 25 50 75 100 125 150 175 0 0.2 0.4 0.6 0.8 1.0 1.2 Tch - Channel Temperature - C
VSD - Source to Drain Voltage - V
CAPACITANCE vs. DRAIN TO SOURCE VOLTAGE 10000 100
SWITCHING CHARACTERISTICS
td(on), tr, td(off), tf - Switching Time - ns
Ciss, Coss, Crss - Capacitance - pF
td(off) tf 10 td(on) tr VDD = 15 V VGS = 10 V RG = 10 1 0.1 1 10 100
1000
Ciss
Coss 100 Crss
10 0.1
VGS = 0 V f = 1 MHz 1 10 100
VDS - Drain to Source Voltage - V
ID - Drain Current - A
REVERSE RECOVERY TIME vs. DRAIN CURRENT 1000
DYNAMIC INPUT/OUTPUT CHARACTERISTICS 40
VDS - Drain to Source Voltage - V
trr - Reverse Recovery Time - ns
30 25 20 15 10 5 0 0
100
VDD = 24 V 15 V 6V
6 VGS 5 4 3 2 VDS ID = 13 A 1 10 12 14 16 18 0 20
10
1 0.1
1
10
100
2
4
6
8
IF - Drain Current - A
QG - Gate Charge - nC
VGS - Gate to Source Voltage - V
di/dt = 100 A/ s VGS = 0 V
8 7
35
Data Sheet G15845EJ2V0DS
5
PA2702TP
[MEMO]
6
Data Sheet G15845EJ2V0DS
PA2702TP
[MEMO]
Data Sheet G15845EJ2V0DS
7
PA2702TP
* The information in this document is current as of May, 2002. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above).
M8E 00. 4

▲Up To Search▲

Price & Availability of UPA2702TP

	To Download UPA2702TP Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .